نسخه v6.36.3 [current] میکروتیک آماده شد

تغییرات این نسخه



What's new in 6.37 (2016-Sep-23 08:20):
!) console - dfs-mode setting does not exist any more and all scripts with such setting will not be executed;
!) dude - (changes discussed here: viewtopic.php?f=8&t=110424);
!) dude - from now on dude will use winbox port and it will be changed automatically both in client loader and agent configuration;
!) ethernet - added new loop-protect feature for ethernet, vlan, eoip, eoipv6 interfaces, http://wiki.mikrotik.com/wiki/Manual:Loop_Protect ;
!) wireless - "wireless" package included in bundle "routeros" package;
!) wireless - "wireless-cm2" discontinued;
!) wireless - "wireless-rep" renamed to "wireless";
!) wireless - DFS option is removed, corresponding DFS mode for each frequency range applies automatically;
*) capsman - fixed kernel crash on cap while changing client-to-client forwarding;
*) capsman - report radio-name in registration table;
*) certificate - do not allow to remove certificate template while signing certificate;
*) console - hotspot setup show wrong certificate name;
*) defconf - fixed default configuration restore if virtual wireless interface were present;
*) defconf - fixed default configuration when wireless package is used;
*) defconf - using caps button now forces all wireless interfaces in caps mode;
*) dhcpv6 - improved interface status tracking;
*) dhcpv6 - reworked DHCP-PD server interface and route management;
*) dhcpv6 - update DUID when system-id changes (solves problem when cloned VM retains the same DUID);
*) dns - fixed crash when using regexp static dns entries;
*) ethernet - added support for LAN9514 ethernet dongle;
*) ethernet - allow to force mtu value when actual-mtu is already the same;
*) ethernet - fixed loop-protect on bridged ports;
*) ethernet - fixed never ending loop in CDP packet processing;
*) ethernet - fixed rare kernel failure on non-switch ethernet reset;
*) ethernet - rb44ge now have disabled-running-check=no by default;
*) firewall - added additional matchers for firewall raw rules;
*) firewall - fixed time based rules on time/timezone changes (again);
*) gps - always check NMEA checksum if available;
*) health - do not show psu and fan information for passive cooling devices;
*) hotspot - show comments from user menu also in active menu;
*) ipsec - fixed crash with enabled fragmentation;
*) ipsec - fixed dynamic policy not deleted on disconnect for nat-t peers;
*) ipsec - fixed fragmentation use negotiation;
*) ipsec - fixed kernel crash when sha512 was used;
*) ipv6 - fixed RA and RS processing on new interfaces after many interfaces have lost link during prolonged operation;
*) ipv6 - improved system responsiveness when ipv6 routes are frequently modified;
*) ipv6 - show multiple neighbors with the same address;
*) kvm - fix add/remove of disabled interfaces;
*) kvm - fixed guest crashing when using mtu bigger than 1504;
*) l2tp - fixed kernel failure when fastpath handles l2tp packets;
*) leds - added option to disable all leds on RBcAP2n;
*) lte - added ability to send/receive sms using '/tool sms';
*) lte - added dlink dwm-157 D, dwm-222 support;
*) lte - added huawei me909s variant;
*) lte - added initial deregistration only for bandrich modems;
*) lte - added logging for usb config switching;
*) lte - added Pantech UML295, Vodafone K4201-Z, ZTE MF823/MF831 support;
*) lte - added rndis for ZTE MF8xx;
*) lte - added support for more dlink dwm-222 configurations;
*) lte - added switch for Huawei K5160;
*) lte - added zte K5008-Z back;
*) lte - adjusted usb config for dlink dwm-157 D;
*) lte - fixed at chat condition storage;
*) lte - fixed band setting for sxt lte;
*) lte - fixed band unsetting;
*) lte - fixed default channels for dlink dwm-157;
*) lte - fixed ip activation when CREG (circuit switched) state remains in not registered state;
*) lte - fixed setting correct lte band for sxt lte;
*) lte - process initial state change to deregistred, when lockup occurs;
*) lte - reset if sms storage set fails;
*) mpls - fixed memory leak;
*) mpls - fixed vpls throughput issues caused by out-of-order packets;
*) ntp - fixed ntp server when local-clock used (like usb gps module);
*) partitions - added ability to add comments;
*) ppp - use default-route-distance when adding ipv6 default route;
*) ppp,lte - pin is now converted to string argument;
*) pppoe - fixed disconnects by idle timeout when fastpath is used;
*) quickset - added 2GHz-g/n band support;
*) quickset - fixed guest reporting in "home ap dual" mode;
*) quickset - fixed wireless frequency fields in "home ap dual" mode;
*) rb3011 - fixed rare occasions when router would hang while loading kernel;
*) routing - improved kernel performance in setups with large routing tables;
*) sfp - enabled eeprom printout in /interface ethernet monitor;
*) sfp - fixed initial eeprom reading on CCR1036-8G-2S+ and CCR1072-1G-8S+;
*) sfp - removed "sfp-rate-select" as command was not relevant to currently supported hardware;
*) sms - moved incorrectly logged message from async to gsm topic;
*) sms - report error when unsupported modem is being used;
*) snmp - added script table which executes script and returns it's output on get request;
*) snmp - require write permitions for script run table access;
*) snmp - skip forbidden oids on getnext completion;
*) sstp - allow to specify proxy by dns name;
*) sstp - now supports TLS_ECDHE algorithms;
*) supout - fixed bug that could cause enormous size supout.rif files;
*) supout - improved crash report generation for tile architecture;
*) switch - added comment field for CRS switch VLANs;
*) traffic-flow - allow ipv6 src address to be optional;
*) traffic-flow - fixed IPFIX packet timestamp;
*) traffic-flow - fixed IPFIX wrong flow sequence;
*) trafficgen - add per stream packet count setting;
*) trafficgen - show out-of-order packet counters in stats printouts;
*) tunnel - fixed communication via tunnel to router itself if fastpath was active;
*) tunnel - fixed ipv6 link-local address adding for gre;
*) tunnel - increased minimal MRRU to 1500 for PPP interfaces;
*) tunnel - ipv6 link-local address is now generated from tunnel local-address;
*) usb - added support for SMSC95XX USB Ethernet dongle on mipsbe;
*) usermanager - fixed rare crash on paypal payment;
*) users - fixed script policy checking against user policies when running scripts;
*) webfig - do not crash if radius server does not give out encryption keys;
*) webfig - fixed certificate signing;
*) winbox - added auto refresh for BFD neighbors;
*) winbox - added comment field support for switch vlan menu;
*) winbox - added default-authentication parameter for wireless station modes;
*) winbox - added src-address field for traffic-flow target;
*) winbox - adjust on-event field dynamically depending on window size;
*) winbox - adjusted allowed values for http-proxy field;
*) winbox - disabled MRRU by default for PPP interfaces;
*) winbox - display actual-mtu for tunnels in interfaces window;
*) winbox - fixed disconnect when no windows were opened for a while in unsecure mode;
*) winbox - fixed multiline read only fields not displaying new line characters;
*) winbox - fixed raw firewall showing jump targets from filter chains;
*) winbox - hide ethernet flow control settings for interfaces which does not support them;
*) winbox - removed health menu from devices that do not support it;
*) winbox - removed L2MTU field for PPP interfaces;
*) winbox - removed L2MTU field from PPP server binding settings;
*) winbox - removed unset button for L2MTU field;
*) winbox - show firmware-type in routerboard window;
*) wireless - display DFS flag in country info;
*) wireless - improved driver support for RB953, hAP ac, wAP ac;
*) wireless - send deauth to data frames in scan mode.
*) wireless - updated brazil country settings;

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

این سایت از اکیسمت برای کاهش هرزنامه استفاده می کند. بیاموزید که چگونه اطلاعات دیدگاه های شما پردازش می‌شوند.